The Videoplex 4 Video Wall Controller is a standalone display wall controller that supports a standard single- or dual-link DVI input and flexibly displays output over four monitors.
The Videoplex 4 upscales input whether it's DVI or analog RGB driven. Maximum output (1080p) and frame rate do not need to be related to that of the input. Monitors can display a cropped region of the original input image. Additionally, each output can be independently mirrored or rotated through 90, 180, or 270 degrees to support creative mixes of landscape and portrait monitors.
At high resolutions, DVI signals usually degrade after 5 m. With the Videoplex 4 Video Wall Controller, active equalization hardware on the appliance is able to compensate for cable or signal losses, and supports cable lengths up to 65.6 feet (20 m) even at full dual-link resolutions. Lower resolutions enable longer cable lengths.
(1) DVI-D female for input;
(4) DVI-I female for output;
(1) 3-Pin Power Connector female;
(1) USB-B female;
(2) Sync ports (unused)
LED Interface — (1) Power LED, (1) Input LED, (1) Status LED
Leads Supported— DVI-D (Dual Link on input only)
Input: 100–240 VAC, 0.8 Amps; Output: 5–8 VDC, 4 Amps;
Consumption: 20–32 Watts
Operating Temperature — 0ºC to 40º C (32ºF to 104ºF)
Operating Humidity — 90% non-condensing
Size — 23.H5 x 17.5W x 4.4D cm (9.3"H x 7"W x 1.7"D)
Approvals — CE, RoHS
Application diagram - Download JPG
Black Box Explains
Mail a friend